How to Measure Your Ring Size at Home: A Men's Guide
Share
The right size matters more than most people think. A ring that is too tight is uncomfortable, and one that is too loose slides off or spins. Here is how to get it right at home.
Method 1: measure a ring you already own
Measure the inside diameter of a ring that fits well, in millimeters, then match it to the chart. Take the reading in a few positions, since rings are rarely perfectly round.
Method 2: string or paper strip
- Cut a strip of paper or a piece of non-stretchy string.
- Wrap it around the base of the finger you will wear the ring on.
- Mark where the ends meet.
- Lay it flat and measure the length in millimeters. That is your finger circumference.
- Match it to the chart below.
Size chart (US)
| US size | Circumference (mm) |
|---|---|
| 7 | 54.4 |
| 8 | 57.0 |
| 9 | 59.5 |
| 10 | 62.1 |
| 11 | 64.6 |
| 12 | 67.2 |
| 13 | 69.7 |
KYNTSU rings are currently available in US 9, 10 and 11. See our size guide for details.
Tips for accuracy
- Measure at the end of the day, when fingers are at their largest.
- Avoid measuring when your hands are cold.
- The ring must slide over your knuckle, so check that measurement too.
- If you fall between two sizes, choose the larger one.
- Wider bands feel tighter. For a wide ring, consider going up a half size.
- Measure more than once, on different days.
Not sure? Ask first
If you are between sizes or unsure, contact us before you order. Our returns and exchanges policy explains how size exchanges work.
FAQ
Which finger should I measure?
The one you will wear the ring on. Fingers differ in size, and your dominant hand is usually slightly larger.
Should I choose a half size?
If you are between sizes, go up. A ring that is slightly loose is easier to live with than one that is too tight.
Ready to find your piece? The Forged Ring and The Signet are part of the collection.